Professional glue 330g can +3 x brushes and 2 x tapes

Professional glue 330g can +3 x brushes and 2 x tapes

The kit includes:

- Dr. Boat can 330 ml,

- 3 brushes, - masking tape,

- insulating tape.

Color: transparent / colorless / transparent.

Selected DR.BOAT 2 IN 1 ADHESIVE FOR PVC Pontoons and Pools (liquid glue and patch) with the effect of cold welding + free reinforcing mesh.

Why choose DR. Boat over other adhesives?:

• The glue is specialized.
• The formula of the adhesive is designed in such a way that it can be used to repair items used both in fresh and salt water.
• You can use it as a standard glue for sticking patches or as a liquid patch.
• During gluing, it does not require the use of hardeners and heating.
• After drying, it retains the strength and flexibility of the glued object.
• It is durable and flexible.
• The glue is transparent and can be used to repair items of different colors.

Brief instructions for use:

Using in conjunction with a patch:

• Carefully degrease the glued surfaces.
• Next, lubricate the patch and the glued object with a thin layer of glue.
• Then put the patch on the glued object, press and hold for 1 minute.
• The minimum drying time is 6 hours, but it is best to wait 24 hours.

Using without a patch:

• Degrease the damaged area.
• The glued object should be secured against moving (e.g. with clamps).
• Apply a thick layer of glue to the damaged area 1 cm larger than the damage in all directions.
• Wait 20 minutes.
• Apply a second thick layer.
• After 5 hours, remove the clamps. 
• After 24 hours, the glued object can be used.
• In case of larger damage (cuts more than 3 cm), carry out the repair using a reinforcing mesh, which comes with the glue. 
• Prepare a mesh 2 cm larger than the damaged area. 
• Thoroughly degrease the surface. 
• Apply glue to the damaged area and press it into the mesh. 
• After 20 minutes, apply the glue again on the surface 1.5 cm larger than the previous layer.
• The glued area becomes sufficiently strong after 24 hours