Liquid Patch PVC Liquid Patch tube 20ml + Strengthening Mesh

Liquid Patch PVC Liquid Patch tube 20ml + Strengthening Mesh

"Liquid Patch" is a simple and reliable repairer of pontoon and other PVC products in any condition. With the Liquid patch, you do not need to use a dryer, patches or even glue !!!

"Liquid Patch" - is PVC in a liquid form, i.e. the original material from which the repaired product was actually produced.

Liquid Patch - an improved glue for inflatable boats, tents, boats, pools and other PVC bags in any condition without heating or patches.

 How does it work? Just drip a few drops from the tube onto the hole, wait 24 hours, and hey presto! The hole in the PVC is sealed!

 If the cut is large, simply sew it up before pouring on the liquid patch. Wait 24 hours.

 Liquid Patch is Innovative German technology !!! Repairs, practically, all inflatable boat damage.

 "Liquid Patch" - is a product capable of removing virtually any defect caused by a PVC product at the molecular level.

The uniqueness of the Liquid Patch

• HOW THE LIQUID PATCH WORKS: Dissolves the layer of the repaired material, creating a uniform surface
• MATERIALS FOR WHICH IT CAN BE APPLIED: PVC, trilaminate, neoprene, gore-tex, leather, eco-leather, polyester
• Availble in 6 colours, but the most popular is colourless!

A wide range of colors allows you to perfectly match the color of the Liquid Patch to be stealthily applied to your damaged product.

Stir before use

"Liquid Patch" is not an adhesive, it is liquid PVC with a unique chemical composition, giving it properties, such as:

• High adhesion;
• Thermal resistance;
• Flexibility;
• Maintaining the original features and properties of the repaired equipment;
• Water resistance;
• Resistance to UV radiation
• Simplicity of use
• Extending the service life of repaired equipment

Liquid PVC patch can be used to repair countless products in any condition:

repair of pontoons and inflatable boats, inflatable houses, tarpaulins for trailers (e.g. after an attempted break-in into a truck trailer), balloons, gymnastic balls, rubber shoes, toys for children, swimming suits, water shoes, gloves, caps, shoe soles, bicycle and motorcycle saddles, car seats, water beds, air mattresses and even inflatable pools! You name it, liquid patch can fix it!

The product does not freeze at relatively negative temperatures, but we don’t recommend aiming to repair your product at low temperatures.

The liquid patch only needs one layer! A second layer may harm the first, it will dissolve it. Work should be done on a non-inflated product. After applying the Liquid Patch, the product should not be used for 24 hours. Plus, for a period of 24 hours, your patch is still quite fresh and all the chemical processes aren't over. Remember !!! The "liquid patch" reaches its maximum potency in 7-10 days. - The damaged surface must be degreased. - For the aesthetic side - use insulating tape (painter's tape). Determine an area that you would not like "Liquid Patch" to come out of. Enjoy your break while saving your precious time with "Liquid Lat". Expiry date - 2 years

Reinforcing mesh

Reinforcing mesh, 25 cm long and 5 cm wide.

 Used for reinforcements or repairs together with Liquid Patch PVC, Liquid PVC Ulow, Dr. Boat etc.

 We recommend using this mesh when repairing cuts or holes over 2 cm.

Directions for use:

 1) Clean and degrease the damaged area.

2) Place the mesh.

3) Apply a layer of liquid PVC on top.

It is important to apply the liquid PVC wider by min. 1 cm than the edges of the mesh on each side.

You should also wait a few hours after the repair before using the equipment you are repairing.

The mesh will form a uniform layer with liquid PVC and the repaired area will be strengthened beyond the original strength of the equipment.