• Dr. Boat adhesive + Liquid Patch PVC Liquid Patch tube 20ml

The Symbol : 199
55.00
opak Add to wishlist
Reviews
Shipping within 24 hours
Shipping price 12
Paczkomaty InPost 12
Poczta Polska 15
Kurier (Pobranie) 22
Kurier 35
The Availability Of 100 opak

Zamówienie telefoniczne: 608069511

Leave your phone

Selected DR.BOAT 2 IN 1 ADHESIVE FOR PVC Pontoons and Pools (liquid glue and patch) with the effect of cold welding + free reinforcing mesh.

Why choose DR. Boat over other adhesives?:image

  • The glue is specialized.
  • The formula of the adhesive is designed in such a way that it can be used to repair items used both in fresh and salt water.
  • You can use it as a standard glue for sticking patches or as a liquid patch.
  • During gluing, it does not require the use of hardeners and heating.
  • After drying, it retains the strength and flexibility of the glued object.
  • It is durable and flexible.
  • The glue is transparent and can be used to repair items of different colors.


Brief instructions for use:

Using in conjunction with a patch:

  • Carefully degrease the glued surfaces.
  • Next, lubricate the patch and the glued object with a thin layer of glue.
  • Then put the patch on the glued object, press and hold for 1 minute.
  • The minimum drying time is 6 hours, but it is best to wait 24 hours.


Using without a patch:

  • Degrease the damaged area.
  • The glued object should be secured against moving (e.g. with clamps).
  • Apply a thick layer of glue to the damaged area 1 cm larger than the damage in all directions.
  • Wait 20 minutes.
  • Apply a second thick layer.
  • After 5 hours, remove the clamps. 
  • After 24 hours, the glued object can be used.
  • In case of larger damage (cuts more than 3 cm), carry out the repair using a reinforcing mesh, which comes with the glue. 
  • Prepare a mesh 2 cm larger than the damaged area. 
  • Thoroughly degrease the surface. 
  • Apply glue to the damaged area and press it into the mesh. 
  • After 20 minutes, apply the glue again on the surface 1.5 cm larger than the previous layer.
  • The glued area becomes sufficiently strong after 24 hours

 

 DR.BOAT- is a product capable of removing, down to the molecular level, virtually any defect caused by a PVC tissue product.

  • High adhesion,
  • UV resistant,
  • Vulcanization (monolith with the product),
  • Elastic,
  • The original properties of the material base are preserved.

 

 The product won’t freeze at relatively negative temperatures, but avoid repairing your product at low temperatures.

 


 

Liquid Patch PVC Liquid Patch tube 20ml + Strengthening Meshimage


"Liquid Patch" is a simple and reliable repairer of pontoon and other PVC products in any condition. With the Liquid patch, you do not need to use a dryer, patches or even glue !!!

"Liquid Patch" - is PVC in a liquid form, i.e. the original material from which the repaired product was actually produced.

Liquid Patch - an improved glue for inflatable boats, tents, boats, pools and other PVC bags in any condition without heating or patches.

 How does it work? Just drip a few drops from the tube onto the hole, wait 24 hours, and hey presto! The hole in the PVC is sealed!

 If the cut is large, simply sew it up before pouring on the liquid patch. Wait 24 hours.

 Liquid Patch is Innovative German technology !!! Repairs, practically, all inflatable boat damage.

 "Liquid Patch" - is a product capable of removing virtually any defect caused by a PVC product at the molecular level.




The uniqueness of the Liquid Patch

  • HOW THE LIQUID PATCH WORKS: Dissolves the layer of the repaired material, creating a uniform surface
  • MATERIALS FOR WHICH IT CAN BE APPLIED: PVC, trilaminate, neoprene, gore-tex, leather, eco-leather, polyester
  • Availble in 6 colours, but the most popular is colourless!

 

 

 

A wide range of colors allows you to perfectly match the color of the Liquid Patch to be stealthily applied to your damaged product.


Stir before use


"Liquid Patch" is not an adhesive, it is liquid PVC with a unique chemical composition, giving it properties, such as:

  • High adhesion;
  • Thermal resistance;
  • Flexibility;
  • Maintaining the original features and properties of the repaired equipment;
  • Water resistance;
  • Resistance to UV radiation
  • Simplicity of use
  • Extending the service life of repaired equipment




Liquid PVC patch can be used to repair countless products in any condition:

repair of pontoons and inflatable boats, inflatable houses, tarpaulins for trailers (e.g. after an attempted break-in into a truck trailer), balloons, gymnastic balls, rubber shoes, toys for children, swimming suits, water shoes, gloves, caps, shoe soles, bicycle and motorcycle saddles, car seats, water beds, air mattresses and even inflatable pools! You name it, liquid patch can fix it!



The product does not freeze at relatively negative temperatures, but we don’t recommend aiming to repair your product at low temperatures.


The liquid patch only needs one layer! A second layer may harm the first, it will dissolve it. Work should be done on a non-inflated product. After applying the Liquid Patch, the product should not be used for 24 hours. Plus, for a period of 24 hours, your patch is still quite fresh and all the chemical processes aren't over. Remember !!! The "liquid patch" reaches its maximum potency in 7-10 days. - The damaged surface must be degreased. - For the aesthetic side - use insulating tape (painter's tape). Determine an area that you would not like "Liquid Patch" to come out of. Enjoy your break while saving your precious time with "Liquid Lat". Expiry date - 2 years


There is currently no comments or ratings for this product.
The Signature Of The
Email
Ask a question