• Dr. Boat Adhesive + Professional glue

43.00
opak Add to wishlist
Reviews
Shipping within 24 hours
Shipping price 12
Paczkomaty InPost 12
Poczta Polska 15
Kurier (Pobranie) 22
Kurier 35
The Availability Of 98 opak
The Weight Of The 0.15 kg

Zamówienie telefoniczne: 608069511

Leave your phone

Dr. Boat Adhesive + Professional glue

 

Specialized DR.BOAT 2 IN 1 ADHESIVE FOR PVC Pontoons and Pools (liquid glue and patch) with the effect of cold welding + free reinforcing mesh.


Why choose DR. Boat over other adhesives?:image

1) The formula of the adhesive is designed in such a way that it can be used to repair items used both in fresh and salt water.

2) Can be used as standard patch glue or as a liquid patch.

3) Doesn’t require the use of hardener or heating.

4) After drying, it retains the strength and flexibility of the glued object.

5) It is durable and flexible.

6) UV resistant.

7) Vulcanization (monolith).

8) Keeps the original properties of the material base.


Usage methods:


To use with a patch:

1) Carefully degrease the glued surfaces.

2) Grease the patch and the glued object with a thin layer of glue.

3) Put the patch on the glued object, press and hold it for 1 minute (the pressing force is what counts, not so much the duration).

4) The minimum drying time is 6 hours, but it is best to wait 24 hours.


Using without a patch:

Degrease the damaged area.

The glued object should be secured against moving (e.g. with clamps).

Apply a thick layer of glue to the damaged area 1 cm larger than the damage in all directions.

Wait 20 minutes.

Apply a second thick layer.

After 5 hours, remove the clamps. 

After 24 hours, the glued object can be used.


In case of larger damage (cuts over 3 cm), carry out the repair using a reinforcing mesh, which comes with the glue. 

Prepare a mesh 2 cm larger than the damaged area. 

Thoroughly degrease the surface. 

Apply glue to the damaged area and press it into the mesh. 

After 20 minutes, apply the glue again on the surface 1.5 cm larger than the previous layer. The glued area becomes sufficiently strong after 24 hours



DR.BOAT - is a product capable of removing, down to the molecular level, virtually any defect caused by a PVC tissue product.


High adhesion,

UV resistant,

Vulcanization (monolith with the product),

· Elastic,

The original properties of the material base are preserved.


The product won’t freeze at relatively negative temperatures, but avoid repairing your product at low temperatures.



Professional glue 35ml tube


Polyurethane adhesive for repair and modification of inflatable boats, trampolines, etc. This adhesive is actually used in the production of inflatable boats in factories and is recommended for use in sticking various handles and accessories to inflatable boats.

Designed for quick and reliable repair of PVC products that are used outdoors, whether In the sea or in freshwater. Resistant to UV rays.

Recommended for quick and high-quality repairs of image

- boats and inflatables,

- trampolines and inflatable objects,

- car inner tubes,

- commercial pavilions,

- tourist tents, kayaks, canoes, catamarans and sports and tourist footwear. 


Cold glue method:

1) Mark the place for the patch. Cut a patch from fabric or PVC film in a size that is 4-5 cm larger than the damaged area.

2) Clean and degrease the patch and the patch site.

3) Apply a thin layer of glue on both surfaces to be glued.

4) Dry for 5-10 minutes. Apply the second layer of glue and dry for 3-5 minutes. It is important to mark the point at which the glue stickiness starts to disappear (you can check this by touching it with your finger), put the patch in place and press firmly. We recommend leaving the gluing point under pressure for 3-4 hours. The glued equipment can be used after 3-4 hours.


Hot glue method:

1) Mark the place for the patch. Cut a patch from fabric or PVC film in a size that is 4-5 cm larger than the damaged area.

2) Clean and degrease the patch and the patch site.

3) Apply a thin layer of glue on both surfaces to be glued.

4) Dry for 5-10 minutes. Apply the second layer of glue and dry for 5-10 minutes.

5) Heat the glued surfaces to a temperature of 60 ° С, put the patch in place and press it firmly. The glued equipment can be used after 20 minutes.


Further Recommendations:

Glue cuts and damages larger than 4 cm on both sides. 

We recommend repairing cuts and damages with a length greater than 6 cm in specialized workshops. 

Repaired equipment with greater damage: we recommend that you repair it again at the first opportunity with a two-component glue. Operating temperature of glued equipment is  from - 40 ° С to +80 ° С. 

Repair at a temperature greater than 10 ° С. 

Store and transport at a temperature of - 10 ° С to + 30 ° С. 

Fresh glue is removed with alcohol or acetone

The maximum effect is after 24 hours. CAUTION FLAMMABLE! Keep out of reach of children. 

 

Work should be carried out in a ventilated room and should be kept away from fire and flammable areas. 


There is currently no comments or ratings for this product.
The Signature Of The
Email
Ask a question